Музыкальный набор - конструктор Music Robot Kit V2.0 (с электроникой)
- Makeblock Socket Cap Screw will be replaced by Button Head Socket Cap Screw gradually, and the tool HEX Screwdriver 3mm will be replaced by HEX Screwdriver 2.5mm.
- The power supply in this kit is USA plug AC to DC wall power supply. You can buy other Power plugs in our website.
Music Robot Kit V2.0 (With Electronics) is the improvement version of Music Robot Kit V1.0 (With Electronics).
Me BaseBoard instead of previous Meduino and Me BaseShield. Reduce Size and easier to users.
Simplify the mechanical structure, reduce some unnecessary components
Adding LED RGB strip to bring some shiny effects when playing the music
Adding two new control mode：Me Ultrasonic modules allows users to play the music via detecting the position of gestures；a pre-programmed tune can be played
This kit can be used to build a Music Robot. It can play the Xylophone by an application via USB cable installed on computer. By this application you can use your keyboard of computer to play the Xylophone by the Number Key from 1 to 7 directly. And you can also type a music score in the application and then send it to the robot, the robot will play the music you have sent automatically.
- Three different ways to play this Music Robot
1.Control by the position of gestures(Using an ultrasonic modules detect the position)
2.A pre-programmed tune can be played(or you programme to play)
3.Control by PC Software
- High quality stepper motor mates with high performance Me stepper motor dirver
- Easy to drive and can play Xylophone very well
- Strong aluminum extrusion parts, anodizing surface
Power Supply: 12V
|1 × Beam 0824-64||2 × Threaded Shaft 4x39mm||8 × Plastic Rivet R4120|
|2 × Beam 0824-96||2 × Shaft Collar 4mm||4 × Plastic Ring 4x8x1mm|
|5 × Beam 0808-96||6 × V-slot Bearing||2 × Plastic Ring 4x7x2mm|
|1 × Beam 0808-160||3 × Flange Bearing 4x8x3mm||1 × Xylophone|
|2 × Slider 496||1 × HEX Screwdriver 3mm||1 × Streamer|
|2 × Bracket 3x3||1 × Cross Screwdriver 3mm||1 × Me-Baseboard|
|1 × Plate 3x6||1 × HEX Allen Key 1.5mm||1 × Me-Ultrasonic Sensor|
|2 × Plate 7x9||1 × Wrench 7mm||1 × Me Stepper motordriver V1.0|
|1 × Belt Connector||20 × Socket Cap Screw M4x8||1 × LED RGB Strip-Addressable, Sealed|
|1 × 42BYG Stepper Motor Bracket||36 × Socket Cap Screw M4x14||1 × Me Micro Switch|
|1 × DC Frame Type Solenoid||2 × Socket Cap Screw M4x22||1 × RJ25 Adapter|
|1 × 42BYG Stepper Motor||50 × Nut M4||1 × Wall Adapter Power Supply - 12VDC|
|1 × Shaft Connector-4mm||8 × Countersunk Screw M3x8||3 × 6P6C RJ25 cable-20cm|
|2 × Timing Pulley 62T||5 × Headless Set Screw M3x5||1 × USB 2.0 A-Male to Micro B-Male Cable|
|4 × Timing Pulley Slice 90T||2 × Nylon Stud M4*30||1 × Base Bracket|
|1 × Open-end Timing Belt (2m)||4 × Plastic Rivet R4060||4 × Nylon cable ties 2*100|